plen
Logo Modern Masters
Rust effect. Step by step

Paint a properly prepared surface with ACID BLOCKING PRIMER. When using METAL EFFECTS system on metal surfaces they should be covered very precisely (at least 2-3 coats). It protects the surface against the possible corrosion. Use a brush, roller or airless paint sprayer. Apply next coats only when the previous in dry. The average dry time of one coat is approximately 2 hours.

After at least 12 hours apply IRON PAINT (using a brush, roller or airless paint sprayer). Next coat should be applied after 1-2 hours (low temperatures and high humidity can prolong the dry time).

When the IRON PAINT is completely dry apply RUST ACTIVATOR. The tools for application can vary - depending on the creativity of the painter (Important! Do not use metal tools). We suggest to pour the RUST ACTIVATOR to a bottle with a sprayer (the one for watering flowers for example). It allows to control the spray and apply the coat unequally. After 15 minutes repeat the process applying the coat in the same places as before. The material can additionally be spread with a brush. We recommend to do this especially when dealing spatial details. When applying on the wall we recommend using water sprinkler. Unusual effect can be achieved with a sponge.

After 24 hours apply PERMACOAT PATINA SEALER using a brush, roller or airless paint sprayer. PERMACOAT PATINA SEALER should be diluted with water in 1:1 ratio. The coat should be applied richly. Do not apply using force. Use a very wet tool (wet with material). Do not pressure the tool too much.
If the surface is outside or in places requiring additional protection it should be covered with 2 coats of MASTER CLEAR. You can choose between flat and gloss.
design by wallstudio 2017 | efekt rdzy | farba tablicowa, farba magnetyczna | zielona patyna | świecące farby | efekt metaliczny | efekt korozji | farby metaliczne | efekt patyny | farba magnetyczna |